Bucher E35M Sweeper

Bucher Sweeper sold out of our Langley location!

Below are some of the Key Features of this unit:

• Efficiency of Sweeper: Elevator on rear of the sweeper rapidly moves debris captured, into the hopper.
• Ease of Dumping:“Variable Dump Height Hopper”: Can be emptied at ground level, or into a dump truck. The hopper can be raised and tipped via 2 stage scissors lift.”(Bucher)
• Broom Reach: 144″ total reach.

Key Specifications:

• Hopper Capcity: 3.4M cubed hopper capacity
• Hopper Material: Stainless Steel
• Conveyor: Chain driven, 12 flight-squeege type conveyor
• Tank Capacity: 1400 litre water tank
• Turning Radius and Wheelbase: “Tight 18.6″ turning radius with 136″ wheelbase.’Tight 18.6″ turning radius with 136” wheelbase”(Bucher)
• Side Brooms: “Heavy duty steel disc, drilled for either 4 or 5 segment broom sections”(Bucher)
• Engine: This is a single engine sweeper, allowing for “fuel efficiency and easy maintenance”(Bucher).
• Payload: “Load sensing technology: Complete load sensing hydraulic system and a 3.4m cubed hopper, and 4 piece elevator”(Bucher)
• Hydraulics: “All hydraulics are located in their own system locker for ease and maintenance”(Bucher)

Please stop by our office, and we would be happy to provide more information about Bucher. You can also fill out our contact form below, and we will get back to you as soon as possible:

Contact + Careers | Rollins Machinery

Please Note: Specifications may vary, please verify all specifications with your Rollins salesperson to confirm specifications

New Holland 165 MBS Box Spreader

We have a New Holland 165 MBS Box Spreader in stock at our Chilliwack Office.

Below are some of the key features of this unit:

• Heaped, Single Beater, Cu. Ft (m3): 256 (7.25)
• Heaped, Double Beater, Cu. Ft (m3): 311 (8.81)
• Struck level. cu.ft. (m3): 148 (4.19)
• Struck level, slurry sides, cu.ft. (m3): 187 (4.19)

Give us a call, or stop by! We would be happy to do a demonstration for you.

Labrie Witke Starlight Front End Truck

We have a Labrie Witke Starlight Front End Truck mounted on a Peterbilt Chassis available at our Langley office. These are amazing garbage or recycling collection vehicles, and have been very popular for years. Please see below for key features:

Truck Body Design: Labrie Witke Front End Features:

• “Lightweight abrasion resistant steel
• A450 steel is strong yet light and boasts 5 times the abrasion resistance of mild steel.
• Arm Trunnion Bearings: The Witke Front Loader has outboard mounted steel trunnion bearings that are engineered to last the entire lifespan of the unit, when lubricated properly.
• Efficient Operations: Reduces debris by sweeping it back into the hopper with a second arm lift and using a canopy sweeper that improves visibility for the operator.”(Labrie, 2023).

Productivity:

“Packing Cycle: 18 to 20 seconds

Complete Arm Cycle: 12 to 14 seconds”

Please Note: Specifications May Vary, Please Verify the most up to date information with your sales person.

Please stop by or give us a call for more information on Labrie Refuse/Recycling trucks.

Galbreath Roll-Off Rails on Freightliner Chassis

Brand new Roll Off Truck sold to another great customer. We are a Dealer for Galbreath Roll Off rails, and mounted our rails on a Freightliner Chassis. This is a Galbreath AF (Above Frame), with a Pioneer Tarper to contain the material in the Roll Off Bin. These trucks are often pulling up bins of garbage, recycling, and construction waste.

Galbreath Rails Key Features

• Dual in-board mounted lift cylinders
• Pintle hitch adaptable
• Split Light Bumpers
• Heavy duty rear hinge
• Backup alarm
• Hoist maintenance props
• Tarper/valve mounting platform
• Behind the cab oil resevoir
• Hoist Up alarm with signal light

Please stop by and chat with our sales team at our Chemainus, Kelowna, and Langley office for more information.

Make your garbage and recycling needs easier with Rollins. We’ve been doing it for a long time!

Please note: Specifications May Vary. Please confirm the most recent information with your Rollins Salesperson.

Sewer Equipment 900 ECO Combination Sewer Cleaner

We have a Sewer Equipment 900 ECO currently on order. The 900 ECO is mounted on a Western Star Chassis. Please see the below video of Brodie Henderson walking you through the benefits of one of our customers 900 ECO. Attached is also the Feature Sheet.

Sewer Equipment 900 ECO Combination Sewer Cleaner Key Features

Please note: Specifications May Vary. Please note the options on the Sewer Equipment 900 ECO in the video above may vary from the 900 ECO on order. Please talk to your sales person to confirm the specifications and features of the truck.

Labrie Alleygator

Sold! Labrie Allygator to another great customers

Please note: Specifications May Vary.

Loadmaster Legacy – Refuse/Recycling Truck

Loadmaster Legacy mounted on a Freightliner Chassis. Below are some of the key features of this truck:

• “Mid-Compaction Rear Loader: Compaction rate of 800 to 900 pounds per cubic yard”(Loadmaster, 2023)
• “Single rear axle chassis” (Loadmaster, 2023).
• LED Lights: “Every Loadmaster is equipped with with LED lights by default. LED technology provides enhanced visibility and superior longevity in a small package”(Loadmaster, 2023).
• Super Tough Blades: Loadmaster blades are build to last even on the toughest routes (Loadmaster, 2023).
• Rugged Hopper: 3/16″ T-1 lower hopper sides, 3/16″ T-1 hopper floor liner and 1/4″ hopper sides and floor available”(Loadmaster, 2023).
• Container Lifting Options: “Multiple container lifting options available”(Loadmaster, 2023).
• Body Access Door: “Maintenance is important, Loadmaster incorporated a large body access door and ladder allowing our customers to safely maintain the hydraulic components behind the ejector at the front of the body”(Loadmaster, 2023).
• Dual Clean Out Door Option Available (Not on this unit): “Making it easier to clean out behind the ejector and the front of the body. Sealed to prevent liquid leaking from the body”(Loadmaster, 2023).
• Lighter Body: Mid-Compaction, light body for single rear axle chassis. Built with 8 gauge body sides and 7 gauge body floor. Loadmaster reliability and quality available in sizes from 11-25 cubic yards”(Loadmaster, 2023).

Please note: Specifications May Vary, without notice. Not all of these features pertain to this unit in the picture. These are the specs available when building a Loadmaster.

Give us a call regarding any Loadmaster truck. We can set it up to meet your refuse & recycling needs.

New Holland Boomer 45

Rollins has a New Holland Boomer 45 in stock at our Langley Location. Please see attached brochure for more details

Key Features and Specifications:

Horsepower: 45

ROPS

BMR45 R HST Loader

Loader Serial Number: YMN059581

Front Wheels & Tires: 12 x 16.5 6PR R4

Rear Wheels & Tires: 17.5LX24 6PR R4

For more information on this tractor, please stop by, or fill out the below online contact form:

Contact + Careers | Rollins Machinery

Please Note Specs May Vary. Please Verify Specifications With Your Salesperson.

New Holland Boomer 50

Rollins has a New Holland Boomer 50 in stock at our Langley Location. Please see attached brochure for more details

See Below for Specifications:

• C/W FRT END LDR
• Loader SN: YNM059657
• Front Wheels and Tires: 28 x 8.50 – 15 6PR R3T
• Mid PTO
• Rear Wheels and Tires – 41 x 14 – 20 4PR R3
• Transmission – HST + 3 Range

Please See Attached Brochure for More Details

For more information on this tractor, please give us a call or contact us on our online contact form below:

Contact + Careers | Rollins Machinery

Please Note Specifications May Vary. Please confirm with your salesperson.

LX42 Mower

• “A strong 20 HP/725cc twin-cylinder Kohler HD engine is designed to deliver reliable power to tackle your yard.
• 42 – in strong AeroForce fabricated deck is designed to deliver a premium cut with few clumps and stragglers, fine clippings and evenness.
• Compact AGM battery is designed to deliver a premium experience with a long lifespan, low maintenance and excellent starting performance for reliable starting season to season
• Hydrostatic transmission helps provide smooth operation, no shifting, just push the pedal and go.
• Adjustable cut and sew high back 15-in. seat with armrests and 10-degree incline and slide slope helps provide comfort.”(Cub Cadet, 2023).

For more information on this mower, please contact us either by phone, or on our online form below:

Contact + Careers | Rollins Machinery

Please Note: Specifications May Vary. Please confirm specifications with your Rollins Sales Person.