Bucher E35M Sweeper

Bucher Sweeper sold out of our Langley location!

Below are some of the Key Features of this unit:

• Efficiency of Sweeper: Elevator on rear of the sweeper rapidly moves debris captured, into the hopper.
• Ease of Dumping:“Variable Dump Height Hopper”: Can be emptied at ground level, or into a dump truck. The hopper can be raised and tipped via 2 stage scissors lift.”(Bucher)
• Broom Reach: 144″ total reach.

Key Specifications:

• Hopper Capcity: 3.4M cubed hopper capacity
• Hopper Material: Stainless Steel
• Conveyor: Chain driven, 12 flight-squeege type conveyor
• Tank Capacity: 1400 litre water tank
• Turning Radius and Wheelbase: “Tight 18.6″ turning radius with 136″ wheelbase.’Tight 18.6″ turning radius with 136” wheelbase”(Bucher)
• Side Brooms: “Heavy duty steel disc, drilled for either 4 or 5 segment broom sections”(Bucher)
• Engine: This is a single engine sweeper, allowing for “fuel efficiency and easy maintenance”(Bucher).
• Payload: “Load sensing technology: Complete load sensing hydraulic system and a 3.4m cubed hopper, and 4 piece elevator”(Bucher)
• Hydraulics: “All hydraulics are located in their own system locker for ease and maintenance”(Bucher)

Please stop by our office, and we would be happy to provide more information about Bucher. You can also fill out our contact form below, and we will get back to you as soon as possible:

Contact + Careers | Rollins Machinery

Please Note: Specifications may vary, please verify all specifications with your Rollins salesperson to confirm specifications

Labrie Witke Starlight Front End Truck

We have a Labrie Witke Starlight Front End Truck mounted on a Peterbilt Chassis available at our Langley office. These are amazing garbage or recycling collection vehicles, and have been very popular for years. Please see below for key features:

Truck Body Design: Labrie Witke Front End Features:

• “Lightweight abrasion resistant steel
• A450 steel is strong yet light and boasts 5 times the abrasion resistance of mild steel.
• Arm Trunnion Bearings: The Witke Front Loader has outboard mounted steel trunnion bearings that are engineered to last the entire lifespan of the unit, when lubricated properly.
• Efficient Operations: Reduces debris by sweeping it back into the hopper with a second arm lift and using a canopy sweeper that improves visibility for the operator.”(Labrie, 2023).

Productivity:

“Packing Cycle: 18 to 20 seconds

Complete Arm Cycle: 12 to 14 seconds”

Please Note: Specifications May Vary, Please Verify the most up to date information with your sales person.

Please stop by or give us a call for more information on Labrie Refuse/Recycling trucks.

Galbreath Roll-Off Rails on Freightliner Chassis

Brand new Roll Off Truck sold to another great customer. We are a Dealer for Galbreath Roll Off rails, and mounted our rails on a Freightliner Chassis. This is a Galbreath AF (Above Frame), with a Pioneer Tarper to contain the material in the Roll Off Bin. These trucks are often pulling up bins of garbage, recycling, and construction waste.

Galbreath Rails Key Features

• Dual in-board mounted lift cylinders
• Pintle hitch adaptable
• Split Light Bumpers
• Heavy duty rear hinge
• Backup alarm
• Hoist maintenance props
• Tarper/valve mounting platform
• Behind the cab oil resevoir
• Hoist Up alarm with signal light

Please stop by and chat with our sales team at our Chemainus, Kelowna, and Langley office for more information.

Make your garbage and recycling needs easier with Rollins. We’ve been doing it for a long time!

Please note: Specifications May Vary. Please confirm the most recent information with your Rollins Salesperson.

Loadmaster Legacy – Refuse/Recycling Truck

Loadmaster Legacy mounted on a Freightliner Chassis. Below are some of the key features of this truck:

• “Mid-Compaction Rear Loader: Compaction rate of 800 to 900 pounds per cubic yard”(Loadmaster, 2023)
• “Single rear axle chassis” (Loadmaster, 2023).
• LED Lights: “Every Loadmaster is equipped with with LED lights by default. LED technology provides enhanced visibility and superior longevity in a small package”(Loadmaster, 2023).
• Super Tough Blades: Loadmaster blades are build to last even on the toughest routes (Loadmaster, 2023).
• Rugged Hopper: 3/16″ T-1 lower hopper sides, 3/16″ T-1 hopper floor liner and 1/4″ hopper sides and floor available”(Loadmaster, 2023).
• Container Lifting Options: “Multiple container lifting options available”(Loadmaster, 2023).
• Body Access Door: “Maintenance is important, Loadmaster incorporated a large body access door and ladder allowing our customers to safely maintain the hydraulic components behind the ejector at the front of the body”(Loadmaster, 2023).
• Dual Clean Out Door Option Available (Not on this unit): “Making it easier to clean out behind the ejector and the front of the body. Sealed to prevent liquid leaking from the body”(Loadmaster, 2023).
• Lighter Body: Mid-Compaction, light body for single rear axle chassis. Built with 8 gauge body sides and 7 gauge body floor. Loadmaster reliability and quality available in sizes from 11-25 cubic yards”(Loadmaster, 2023).

Please note: Specifications May Vary, without notice. Not all of these features pertain to this unit in the picture. These are the specs available when building a Loadmaster.

Give us a call regarding any Loadmaster truck. We can set it up to meet your refuse & recycling needs.

Haul – All Discovery

Rollins Machinery is the dealer for Haul-All in BC. We not only sell Haul-All Refuse Trucks, but Haul-All bins as well. “The Haul-All Discovery Bins are a riveted assembly, manufactured from powder-coated steel”(Haul-All, 2023).

These bins have an easily accessible front/unload area. This also allows it to be put at the front of a building. “The BearTight model has been certified Bear Resistant by the Interagency Grizzly Bear Committee (IGBC) following successful testing at the Grizzly Wolf & Discovery Center (GWDC) in Montana”(Haul-All,2023). Haul – All Products are sold from our Langley location.

For further information on Haul-All Containers, please contact our Langley office, or fill out this online form, and we’ll get back to you asap:

Contact + Careers | Rollins Machinery

Please Note: Specifications may vary. Please confirm all specifications with your Rollins Salesperson