New Holland Discbine 209F

New Holland Flail Conditioner – 9 inch misc mower conditioner – standard hookup. Come stop by and have a look! It is located at our Chilliwack location.

Specifications: (From New Holland Website, it may not be for exact year):

Cutting width ft. in. (m): 9’ 2” (2.8)
Cutterbar model: MowMax™ Modular Cutterbar with ShockPRO™ hubs
Number of discs: 7
Knives per disc: 2
Disc speed @ 540 rpm PTO speed rpm: 3000
Tilt angle degrees: 2° – 10°
Flotation: Up & back, adjustable springs
Drive method: PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm): 1.1-2.7 (29-68)
Cutting height w/optional high-stubble shoes in. (mm): 2.25-4.5 (58-115)
Cutting height w/optional adjustable shoes in. (mm): 2.25-4.5 (58-115)

Tractor Requirements

Minimum PTO power required hp (kW): 65 (49)
Hydraulic circuits required: 2
Minimum relief pressure required psi (bar): 1500 (103)
Drawbar: ASAE Category II
Tubeless ag rib implement tires: 9.5L x 14L 6PR

Transport Speed

Max road speed mph (kph): 20 (32)

Dimensions

Width, transport ft. in. (m): 9’ 11” (3.02)
Width , operating ft. in. (m): 14’ 10” (4.52)
Length, transport ft. in. (m): Flail Tine: 18’ 1’’ (5.50)* or Roll: 17’ 7’’ (5.23)*
Length, operating ft. in. (m): Flail Tine: 17’ 8’’ (5.4)* or Roll: 17’ 2’’ (5.23)*
Height ft. in. (m): Transport: 5’ 8” (1.73) / Operating: 4’ 5” (1.35)
Ground clearance with head fully raised in. (mm): 17 (4.32)

Fella BEL-SM208

6 Foot 9″ disc mower. This unit is loctated at our Chilliwack office!

Kello-Bilt Offset Disc

Model 95-1824B. This unit is located at our Chemainus Location.

New Holland 210F Discbine Flail

This unit is in stock at our Chemainus location

Specifications: (From New Holland Website – May not be exact year)

210F Discbine Flail

Cutting Width: 10’4”

Number of Discs: 8

Knives Per Disc: 2

Disc Speed at 540 rpm PTO speed rpm: 3000

Minimum PTO Required HP (Kw): 80 (60)